Instructions for Soft-Touch Film

is designed to offer soft tactility velvet touch to printed substrate. It can be attached to any surface smooth paper printed by various printing types. Its velvet surface is suitable for UV spot coating, foil stamping to enhance its aesthetic look.

General Applications

·High-value Packaging

·User manuals

·Promotion stuff

·Leaflets

Usage Method

1) for laminating soft-touch film

Laminating temperature: 120 ℃ ~130 ℃

2) for glue-coating soft-touch film

Check the gloss surface energy to insure that it is suitable for glue coating. Choose suitable glue and flatten the film to get perfect attaching effect.

Attention

Film handling It is strictly prohibited to roll film with tilting angle or make the film contact with hard objects.

Storage conditions The film should be overhead laying and stored in ventilating and dry place with temperature below 35 ℃and relative humidity lower than 60%; Keep the film away from sources of heat.

Shelf life 6 months

Surface treatment The surface energy may decrease because of inappropriate storage or out of shelf-life. Corona treatment can be employed to make the surface suitable for use.

Technical Data

items	data	Testing method
Thickness / μm	18±5%	GB/T 6672
White spot / 33cm*33cm	≤8(Φ≤0.3mm); ≤5( Φ0.3-0.5mm); ≤0.2(Φ≥0.5mm)	Count with naked eyes after the soft-touch film attached to paper
Wear-resistance	No damage to coating	Loading 125g,abrasing 60 times with soft testing rubber
Ethyl alcohol durability	No damage to coating	Loading 75g,abrasing 200 times with Alcohol cotton covered metal
Tensile strength / Mpa	MD≥95	GB/T1040.3-06
	TD≥190
Breaking elongation / %	MD≤150	GB/T1040.3-06
	TD≤30
Adhension	No peeling off	Hundred lattice method
Surface energy / Dyn	Gloss surface≥32
	Matt surface≥40